Flat-nose pliers with short smooth jaws, suitable for gripping any type of components. Steel thickness 5mm. Total lenght 146mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 5004 D)
-
Flat-nose pliers with long serrated jaws, suitable for gripping components in hard-to-reach areas and for applications that require a strong grip. Steel thickness 5mm. Total lenght 154mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 5007 D) -
Flush cutter for the cutting of copper wire and other soft materials. Tool length 138 mm. Grip model St.
Made by stainless steel offers an high resistance to corrosion, is wet resistant and has an high durability. Thanks to its smooth surface, stainless steel, tends to retain polluting impurities in smaller amounts than others so that it is suitable to be used for applications in clean-room, electronics applied to medical industry and fish industry as well.
Inox steel thickness 2.5 mm.
Also available in the following version:
- with ESD-safe handles in grey/black (code TR 25 X D) -
50° angled flush cutter for specific electronics applications. Tool length 135 mm. Grip model St.
Made by stainless steel offers an high resistance to corrosion, is wet resistant and has an high durability. Thanks to its smooth surface, stainless steel, tends to retain polluting impurities in smaller amounts than others so that it is suitable to be used for applications in clean-room, electronics applied to medical industry and fish industry as well.
Inox steel thickness 2.5 mm.
Also available in the following version:
- with ESD-safe handles in grey/black (code TR 25 50 X D) -
Needle-nose pliers with long serrated jaws, suitable for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2005 D) -
Needle-nose pliers with long smooth jaws, suitable for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2006 D) -
Needle-nose pliers with long serrated jaws rounded on the outside, ideal for gripping components in tight spaces without damaging them. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2015 D) -
Needle-nose pliers with long smooth jaws rounded on the outside, ideal for gripping components in tight spaces without damaging them. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2016 D) -
Flat-nose pliers with long serrated jaws, suitable for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2007 D) -
Flat-nose pliers with long smooth jaws, suitable for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2008 D) -
Flat-nose pliers with long serrated jaws rounded on the outside, ideal for gripping components in tight spaces without damaging them. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2017 D) -
Flat-nose pliers with long smooth jaws rounded on the outside, ideal for gripping components in tight spaces without damaging them. Steel thickness 3mm. Total lenght 160mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 2018 D) -
Pliers with rounded nose and cutting tip. Used for electronics applications but also ideal for making rosaries (the same pair of pliers can be used to make loops and bends and cut wire). Great for chain assembly. Induction-hardened tips. Steel thickness 5mm. Total lenght 147mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PN 5025 C D) -
45° angled needle-nose pliers with long serrated jaws. Ideal for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 152mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PNB 2005 D) -
45° angled needle-nose pliers with long smooth jaws. Ideal for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 152mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PNB 2006 D) -
45° angled flat-nose pliers with long serrated jaws. Ideal for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 152mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PNB 2007 D) -
45° angled flat-nose pliers with long smooth jaws. Ideal for gripping components in hard-to-reach areas and for delicate electronics applications. Steel thickness 3mm. Total lenght 152mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PNB 2008 D) -
45° angled needle-nose pliers with long serrated jaws, rounded on the outside. Ideal for gripping components in hard-to-reach areas without damaging them. Steel thickness 3mm. Total lenght 152mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PNB 2015 D) -
45° angled needle-nose pliers with long smooth jaws, rounded on the outside. Ideal for gripping components in hard-to-reach areas without damaging them. Steel thickness 3mm. Total lenght 152mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PNB 2016 D) -
45° angled flat-nose pliers with long smooth jaws, rounded on the outside. Ideal for gripping components in hard-to-reach areas without damaging them. Steel thickness 3mm. Total lenght 152mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code PNB 2018 D) -
Flush cutter. One of the most popular cutting tools, specially designed for very delicate electronics applications. Steel thickness 2.5 mm. Tool length 138 mm. Grip model St.
Also available in the following versions:
- with safety clip (code TR 25 A)
- with ESD-safe handles in grey/black (code TR 25 D & TR 25 A D) -
Flush cutter. Same characteristics as TR 25, but specially designed with longer handles for reduced cutting effort. Steel thickness 2.5 mm. Tool length 160 mm. Grip model L.
Also available in the following versions:
- with safety clip (code TR 25 L A)
- with ESD-safe handles in grey/black (code TR 25 L D & TR 25 L A D) -
Flush cutter. With cutting edges angled at 25°, it is ideal for hard-to-reach areas; longer handles for reduced cutting effort. Steel thickness 2.5 mm. Tool length 160mm. Grip model L.
Also available in the following versions:
- with safety clip (code TR 25 L 25 A)
- with ESD-safe handles in grey/black (code TR 25 L 25 D & TR 25 L 25 A D) -
Flush cutter for the cutting of copper wire and other soft materials. Ergonomic bi-material anti slip handles for a better grip. Anti-reflection and anti-oxidation surface treatment (phosphate coating). Steel thickness 3mm. Tool lenght 138mm. Grip model St.
Also available in the following versions:
- with safety clip (code TR 30 A)
- with ESD-safe handles in grey/black (code TR 30 D & TR 30 A D) -
Flush cutter. The special treatment of the cutting edges makes this tool particularly suitable for cutting ferrous materials. Steel thickness 3mm. Tool length 138mm. Grip model St.
Also available in the following versions:
- with safety clip (code TR 58 R A)
- with ESD-safe handles in grey/black (code TR 58 R D & TR 58 R A D) -
Flush cutter. The special treatment of the cutting edges makes this tool suitable for cutting even ferrous materials. Steel thickness 3 mm. Tool length 138 mm. Grip model St.
Also available in the following versions:
- with safety clip (code TR 30 58 R A)
- with ESD-safe handles in grey/black (code TR 30 58 R D & TR 30 58 R A D) -
Strong flush cutter with very pointed blades for the cutting of copper wire and other soft materials. Ergonomic bi-material handles for a better grip. Anti-reflection and anti-oxidation surface treatment (phosphate coating). Steel thickness 5mm. Tool lenght 138mm.
Also available in the following versions:
- with safety clip (code TR 5000 PR A)
- with ESD-safe handles in grey/black (code TR 5000 PR D & TR 5000 PR A D) -
Flush cutter. Purposely designed as the simplified version of TR 25, but with the same characteristics. Steel thickness 2.5mm. Tool length 138mm. Grip model S.
Also available in the following versions:
- with safety clip (code TRE 03 AB)
- with ESD-safe handles in grey/black (code TRE 03 NB D & TRE 03 AB D) -
Flush cutter with convex cutting edge, for well-finished cuts. Lightweight and easy to handle, with convex cutting edges for well-finished cuts.
Suitable for plastics. Steel thickness 2.5 mm. Tool length 138 mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code TR 25 B D) -
Flush cutter with convex cutting edge, for well-finished cuts. Lightweight and easy to handle, with convex cutting edges for well-finished cuts.
Suitable for plastics. Steel thickness 3 mm. Tool length 138 mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code TR 30 B D) -
Strong tapered head flush cutter, with well-finished cutting edges.
Suitable for plastics. Steel thickness 5mm. Tool length 138mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code TR 5000 PG D) -
Strong flush cutter with convex cutting edge, for well-finished cuts.
Suitable for plastics. Steel thickness 5mm. Tool length 150mm. Grip model St.
Also available in the following version:
- with ESD-safe handles in grey/black (code TRR 5000 B D) -
Bevelled-edge cutter. The special treatment of the cutting edges makes this tool suitable for cutting ferrous materials. The stronger version of TR 30 58. Steel thickness 3 mm. Tool length 138 mm. Grip model St.
Also available in the following versions:
- with safety clip (code TR 58 A)
- with ESD-safe handles in grey/black (code TR 58 D & TR 58 A D) -
Bevelled-edge cutter. The special treatment of the cutting edges makes this tool suitable for cutting even ferrous materials. Steel thickness 3 mm. Tool length 138 mm. Grip model St.
Also available in the following versions:
- with safety clip (code TR 30 58 A)
- with ESD-safe handles in grey/black (code TR 30 58 D & TR 30 58 A D)
