PREF A - TO 18DatasheetPREF A - TO 18 | a=2.54mm | b=1.27mm | c=1.40mm | d=4.00mm | | | | |
| It forms and cuts transistors at a pitch of 2.54mm.
Dimension "d" can be increased by spacing the MTA jig.
*dimension "c" refers to boards with a thickness of 1.6mm.
|
|
PREF A5 – TO 39DatasheetPREF A5 – TO 39 | a=5.08mm | | c=1.40mm | d=4.00mm | | | | |
| It forms and cuts transistors at a pitch of 5.08mm.
Dimension "d" can be increased by spacing the MTA5 jig.
*dimension "c" refers to boards with a thickness of 1.6mm. |
|
PREF B LEDDatasheetPREF B LED | a=2.54-5.08mm | | c=2.00mm (long pin) | d=3.50mm | | | f=0.6mm | |
| It forms and cuts LEDs at a pitch of 2.54mm with the MLD jig, or at a pitch of 5.08mm with the MCC jig.
Dimension "d" can be increased by spacing the MLD or MCC jig.
*dimension “c” refers to boards with a thickness of 1.6mm. |
|
PREF C - CAPACITORDatasheetPREF C - CAPACITOR | a=5.08mm | | c=2.00mm | d=3.50mm | | | | |
| It forms and cuts capacitors at a pitch of 5.08mm.
Dimension "d" can be increased by spacing the MCC jig.
*dimension "c" refers to boards with a thickness of 1.6mm.
|
|
PREF D-LED/ CAPACITORDatasheetPREF D-LED/ CAPACITOR | a=2.54mm | | c=2.10-5.10mm (long pin) | d=0.6mm | | | f=0.6mm | |
| For cutting LEDs and capacitors when polarity needs to be identified. Dimension C can be increased by spacing the MTC jig.
*dimension "c" refers to boards with a thickness of 1.6mm. |
|
PREF E-TO220DatasheetPREF E-TO220 | | | c=1.50mm | d=4.00mm | | k=2.54mm | | g=7.00mm |
| It forms and cuts the LEDs of TO220 components.
Dimensions "d" and "g" can be increased by spacing the MTA5 jig.
*dimension "c" refers to boards with a thickness of 1.6mm. |
|
PREF F - TO220DatasheetPREF F - TO220 | | | c=1.50mm | | i=2.50mm | k=2.54mm | | g=6mm |
| It forms at a 90° angle and cuts the LEDs and capacitors of TO 220 components. Dimension I can be increased by spacing the MTA5 jig.
*dimension "c" refers to boards with a thickness of 1.6mm. |
|
PREF G - OSCILLATORDatasheetPREF G - OSCILLATOR | a=5.08-7.62mm | | c=1.50mm | d=4.00mm | | | | |
| It forms and cuts oscillators. These two operations are performed in 2 steps (2 pins per step). Dimension "d" can be increased by spacing the MTA4 jig.
*dimension "c" refers to boards with a thickness of 1.6mm. |
|
PREF H - TO220 / CAPACITOR/LEDDatasheetPREF H - TO220 / CAPACITOR/LED | | | c=1.40mm | d=4.00mm | | | | |
| It forms and cuts TO220 components, LEDs and capacitors.
Dimension "d" can be increased by spacing the MTA5 jig (for TO220), the MCC jig (for capacitors), the MLD jig (for LEDs).
*dimension "c" refers to boards with a thickness of 1.6mm. |
|
PREF M-TO220DatasheetPREF M-TO220 | a=2.54mm | b=3.00mm | c=2.00mm | d=7.50mm | | | | |
| It cuts and form only the TO 220 component. 2.54mm shift of the central lead.
*dimension "c" refers to boards with a thickness of 1.6mm. |
|
PREF P - LED OR CAPACITORDatasheetPREF P - LED OR CAPACITOR | a=2.54-5.08mm | | c=2.00mm | | | | | |
| It forms and cuts LEDs and capacitors at a pitch of 2.54mm, with the MLD03 jig, or at a pitch of 5.08mm, with the MCC03 jig.
*dimension "c" refers to boards with a thickness of 1.6mm.
|
|