The MMP 10 is a pneumatic machine designed for end cutting of loose radial components, with pedal activation, capable of cutting up to 3000 components per hour.
Suitable for cutting transistors, LEDs, capacitors, resistors, etc. The components must be inserted into the holes in the 51x43mm cutting area.
The standard cutting height is 3mm, but it can be varied by adding the supplied plate (1.5mm high), reaching a cutting height of 4.5mm.
A multi-height plate is available as an option, for cutting height of 3mm and 2mm / 2.54mm pitch on a single plate.
On request we produce custom plates.
Pitch: 2.54mm and multiples
Ø components: from 0.3 to 1.3mm
Standard cutting height: 3mm (or 4.5mm with extra mask)
Max no. of lead cut in a single operation: 60 at the same time
Cutting area: 51x43mm
Pedal activation
Cutting capacity: 3000 pcs/h
Supply pressure: 6 bar
Consumption: 50 Nl/min
Weight: 6.5 Kg
Dimensions: 280(d)x100(w)x78(h)mm
